Solidoodle 2 Pro / Simplify3D Start & End GCODE

I made a few modifications to the default GCODE for the Solidoodle 2 Pro in Simplify3D. It seems to be working ok so far in Octoprint.

Start GCODE

G28 ; home all axes
G1 Z5 F300 ; move platform down 5mm
G1 X145 Y145 F3000 ; move to back right corner
M190 S[bed1_temperature] T1 ;set and wait bed temperature
M109 S[extruder0_temperature] T0; set and wait extruder temperature
G1 Z0.4 ; position nozzle
G92 E0 ; zero extruder
G1 E7 F225 ; extrude anchor
G92 E0 ; zero extruder
G1 X140 Z0.1 E1.0 F1200 ; slow wipe
G1 X135 Z0.25 ; lift

Stop GCODE

M104 S0 T0 ; turn off extruder
M140 S0 T1 ; turn off bed
G1 Z150 F300 ; lower platform to bottom
G28 X0 Y0 ; home X axis and y axis
M84 ; disable motors

Edit: Just noticed that I had listed the Extruder Preheat as M104 which would only set the temp, not wait for it to reach it. Changed to M109.

Leave a Reply